Menu

Ink Jet

Signolit SIVW

White gloss vinyl calandered, monomeric permanent acrylic adhesive film. Ideal for stickers, signs, decals and mock-ups. It sticks to most clean surfaces.

Printing Systems



Cut sheets

Art. NumberThicknessFormatPacking quantity
22VW0.100.440000.110 mmDIN A4100 sheetsPDF
22VW0.100.447000.110 mmDIN A4250 sheetsPDF
22VW0.100.431000.110 mmDIN A340 sheetsPDF

Technical data

Characteristic

  • High brillance of colours
  • Adhesive light
  • Universal use

Finish

  • self-adhesive with paper backing
  • White glossy

Specifications

Release linersiliconized paper ~ 0.145 mm
Coating PrintsidePower-Gloss®, white glossy
Width (mm)210
Thickness base material with inkjet coating0.110 mm
FormatDIN A4
Adhesion strength~ 10 N / 25 mm (A.F.E.R.A.), after 24 h ~ 15 N / 25 mm (A.F.E.R.A.)
Type of adhesivepolyacrylate dispersion
Length (mm)297
Base Materialcalendered monomeric plasticized PVC, 0.100 mm
Total thickness0.260 mm
Packing quantity 100 sheets

Compatibility

  • For use on most Small Format Ink Jet Printers such as: HP, Canon, Epson, Apple, Digital, Kodak, Lexmark, Olivetti, Tektronix, Xerox, etc.

Handling

  • Laminating: The printed surface must be protected with foils for cold lamination if it is subject to humidity, sweaty hands, abrasion or any other influences. For a short term outdoor use, SIVW must always be protected with a 5mm overlapping lamination.
  • Gluing: SIVW will stick to any solid, smooth surfaces which are dry and free of dirt, grease, silicon etc. Before gluing it is absolutely necessary to check that the surface is appropriate to this aim and that it has been prepared (cleaned) professionally. During gluing the temperature must reach at least 15°C. You can remove SIVW by heating the film’s surface with a hot air gun. Then pull it off carefully.

Storage

  • Store in a cool and dry place

Downloads (PDF)