Menu

Ink Jet

Label Jet PP Matt White P

White matt self-adhesive PP film with paper backing, permanent adhesive. Ideal for stickers, signs and decals.

Printing Systems



Rolls

Art. NumberWidth (mm)ThicknessLength (m)
22PMP.060.721622160.060 mm150PDF
22PMP.060.0911011000.060 mmbulk rollPDF

Technical data

Characteristic

  • High brillance of colours
  • Good wet smear resistance
  • High Level Ink Absorption
  • Permanent self adhesive
  • Low-reflective printing surface
  • Tear resistant
  • Very fast ink drying
  • Universal use

Finish

  • self-adhesive with paper backing
  • White matt

Specifications

Release linersiliconized paper
Coating Printsidemicroporous coating
Width (mm)216
Thickness of carrier material 0.060 mm
Adhesion strength~ 8.0 N / 25 mm (A.F.E.R.A.), after 24 h ~ 14.5 N / 25 mm (A.F.E.R.A.)
Type of adhesiveacrylate dispersion, permanent
Length (m)150
Base MaterialPolypropylene
Total thickness0.170 mm

Compatibility

  • Suitable for most Ink Jet label roll printers using dye- or pigmented inks.

Handling

  • Gluing: All even, smooth surfaces which are dry and free of dirt, grease, silicon etc. can be adhered. The surface to be glued must be checked for suitability before adhesion and properly prepared (cleaned). It is up to the user to test for there own suitability/application, due to the wide variety of surfaces, applications & desired results.
    Gluing temperature at least 5° C
    Service temperature min -20°C, max +80°C

  • It is necessary to protect the surface if it is subject over a long time to abrasion or any other mechanical influences, to dirt or humidity. The lamination can be done right to the edges or over the edges. The user should check before using what is more appropriate.
  • We recommend to use self-adhesive laminating foils for cold lamination.

Storage

  • Shelf life: 1 year after delivery
  • In its original packing at 20-25°C, 45-55% humidity.

Downloads (PDF)